组合操作，联合运行,combination operation

1)combination operation
组合操作，联合运行

2)assembling operation
组合操作
1.
Finally, the math model of positional restriction of assembling fixture, arithmetic for assembling operation and fixture assembling technology based on restriction are discussed.
论述了组合夹具位置约束的数学模型、组合操作的算法和基于约束的夹具组装技术。



3)associative operation
相联操作结合律运算

4)combined operation
联合运行
1.
The measurement results indicate that the system operation efficiency during day and night can all be improved for the combined operation mode,and the superfluous solar energy during daytime may be stored temporarily by the U-tube for the use of night.
在已建成的太阳能-地热能综合利用多功能热泵试验系统上进行了太阳能-地源热泵系统联合与交替供暖运行特性的试验测试,结果表明:联合运行模式不仅可以提高日间系统运行效率,且U型埋管可作为热源缓冲体自动储存日间富余太阳能,以改善夜间运行效率,联合运行测试期内太阳能与地热能热源的承担比例为43。


2.
The characteristics of hydro power generation,wind power generation and their complementation are analyzed, a linear programming model for combined operation of hydro and wind power generation system was built.
对水电、风电的特点及其互补性进行了分析,建立了水电-风电优化联合运行的线性规划模型,用水电厂的历史入库流量和风电场的实测风速研究了水电厂和风电场各自单独运行、理想联合运行及优化联合运行,揭示了水电以其容量支持风电和风电以其电量支持水电的水电-风电互补特性。


更多例句>>

5)joint operation
联合运行
1.
The joint operation impact analysis of the Three Gorges cascade and the Qingjiang cascade power stations;
三峡梯级和清江梯级联合运行影响分析


2.
Research in joint operation program of air-condition and seawater desalination;
空调与海水淡化联合运行方案研究


3.
Considering the features of multiannual reservoir, this paper establishes a compensation adjustment and joint operation model, and presents an algorithm of man-machine interaction, which is based on equal power compensation adjustment calculating and attended by decision makers.
结合多年调节水库特点,本文建立了多年调节水库补偿调节联合运行模型,提出了一种基于等出力补偿调节计算、决策者参与的人机对话算法,通过实例计算表明,该算法具有计算速度快、占用内存少、决策者参与计算等优点,是解决多年调节水库联合运行计算的有效途径,具有重要推广、实用价值。


更多例句>>

6)combined operating
联合运行
1.
Presents the combined operating mode of heat pump with desalination of seawater system.
论述了热泵空调与海水淡化系统联合运行的方式。


更多例句>>


补充资料：组合机床操作规程
适用机型：
1、多轴立式占床：2A135C型、2C150型、2C170C型、Z550K型、Z550KZ型、Z575M型、GZ1101型。
2、组合机床：1A型、2A型、3A型、UT型、XA型、918型、920型、93型、DU型、DKZ型、BZ型、C×11自动线、D×14自动线、BG型、FJ型、FZ型、F×Z型、FZU型、L91型、JZ型、PV型、SZ型、S×型、JZJ型、GZU型、TQZ型、其他。

一、 认真执行《金属切削机床通用操作规程》有关规定。
二、 认真执行下述有关补充规定：
1、
工作中注意气动、液动及机械夹紧装置的工作动态，如压力（气压或液压）下降影响工作夹紧时，应立即停车。
2、
工作中注意刀具特别是装有连接轴的加长刀具，其摆差不得超过规定。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。

组合操作，联合运行,combination operation